anilam 1100 control 2 axis cnc mill with dro on z axis
mill is in excellent condition
9 x 42 table with 12.5 x 24 travels
4200rpm spindle
auto lube
kurt power drawbar for tool change
conversational control
all manuals and training booklets
floppy drive
mill new costs 15k, control new costs 12,500 new
this package would cost you $31,000 new
will sale for a fraction of cost $11,000.00

(. .)
^
---

what kind of work can be done with this cnc?

You could make like billet parts such as billet bowls, exhaust clamps and extended brake line clamps. You will have to learn how to program with the conversational first to do all the above though.


~Teddy~

ram u got ne saved programs to make pieces or u just sellin the machine?

well i could send all kinds of programs with it. wutever part or parts u have im shur i could program for ya. to be honest this thing is so easy to program you wouldnt have any trouble doin ur own. for those that have run a prototrak u would be amazed at how much nicer and easier this thing is to use. ive always said it is by far the best control to learn the real chit on. the way it lays things out is very similar to fanuc,yasnac, hass and all ur majore controls. unlike the dam events on a prototrak... would make someone a very nice machine.
i have three of these and use them evry day. excellent toolroom machine and very tight.

Yeah i agree with ram. I have 4 proto traks and have worked this same anilam control and have also worked on a accurite and this is one of the best of the 3. Its definetly a good mill to have.


~Teddy~

...

BUMPIDY BUMP

really wanna move it....10,500

price drop one last time then it's goin to ebay

if someone takes it i will throw in a kurt 6" vise , set of r8 collets, and some end mills...

first 10k takes it

i will talk to my buddy he may be intrested...
kelly

thanks kelly, this mill is absolutely excellent cond. not trying to pull the wool over anyones eyes on this thing as i have 3 of them and use them everyday.. can call my cell phone to talk more if necessary... 765-969-1327 Todd

ttt

ttt if i sell this thing could maybe finish a bike...

9,800.00

is it 2 or 3 phase 220 eletrical

its 3 phase... c-mon guys someone buy this dam mill so my kids can eat

TTT... SOMEONE COULD MAKE SOME NICE CHIT WITH THIS THING... I HAVE ALL THE MANUALS FOR IT AND EVEN A TRAINING TAPE AND JUST PURCHASED A NEW 14" LCD MONITOR FOR IT... VERY NICE PEICE

I'd buy it if I had the cash. I have a Lagun manual mill and want to eventually add a Cnc mill to my shop. Good luck with the sale.

make me an offer!!! trust me you will never find another mill as clean as this one and it spent the majority of it's life sitting in visteon { ford plant } in connersville in pattern shop untill i got ahold of it 3yrs ago. These anilam's are the most user friendly controls money can buy imo. Really gets you prepared for the real thing later on.

ttt

pm me your phone # i have a local buddy intrested
thanks kelly

i pmed you my numbers but they are also in this post on 2nd page too

someone has to be intrstd in a nice cnc

just finished installing new 14" lcd monitors on all three of my 2 axis bridgeports and made a small plate to hold the circuit board with soft touch buttons for all the monitor functions. These things are so much nicer to look at than the original bubble screen technology!!!! You will still get the old monitor that is in good working order. I also replaced the lexan screen cover for unbeleivable clarity... This may not be the place to try and sell one of these but being a racer/machine shop owner i thought would give fellow racers first shot at an awesome machine...... call anytime with questions.... cell- 765-969-1327 Thanks, Todd Morris

ttt

bump

bump

i just talked to my buddy he told me he is very intrested not shure if mark called you yet?....but told me he is pretty shure he was going to buy it.......if thats the case i will be making a road trip with him to see you if he has not called let me know i will stop and see him and have him call you...he is very searous about your mill...

kelly

sounds good Kelly
I have had a couple guys call about it and one come to look at it so if he is interested he should not waist much time as these guys really liked it. They were other machine shop owners here locally.

Thanks,
Todd

still have it

BUMP...STILL FOR SALE

mark sent an email did you get it todd? not on here....
if not give him a call still really intrested or he can call you?
kelly

I haven't recieved any email from him...
My email is titoolllc@yahoo.com if he has sent it hope he sent it to the right one. I have my blackberry on me all the time so i get my emails instantly. He did call me on my cell and at my shop but i missed him both times. Tried calling him back and didn't get anybody. Still for sale tho..


Thanks,
Todd

ok i will let him know thanks todd

bump

uppiddy up

bump

this seems like a hell of a deal, anyone wanna loan me $10k to get this tool? lol

oh man trust me it is one hell of a deal... i paid 28,800 for a sharp mill with this control new back in 98 and still use it to this day.. it is by far the easiest control to use on the market ... plus it is the genuine bridgeport mill

up again

C-MON SOMEONE MAKE ME AN OFFER

How about new heat treat oven !!! It never been used !

no need for an oven....unless it's big enuff to put this dam thing in it and burn it up.... looks like the only way i will get rid of it...lol

ttt

bump

i still have it....someone make me a solid offer

ok i will let my buddy mark know I will have him call you....
kelly

just wanting to give someone a chance as i have a solid offer of 7,500 cash for this thing.... if anyone cant beat that then it very well may be going to a new home here shortly