Everything from pipes carbs and ignition. ready to run and fresh. RDZ is putting it back together right now.I bought the motor and sent it to him for inspection and didnt do anything else to it. It has been ported already. Jayson Vincent built this motor and I got it from Madracing out of California. The only thing you will have to do is bolt in chassis hook up your CDI and coil. The guy i got it from claimed it to have about 140hp.

10mm DM motor with carbs and pipes
about 5 passes on nickel seal and clutch.
new shift forks,
2-5 override neutral down with billet 2nd
straight cut gears with spring loaded hinson basket
shearer ss out the right DM pipes raw finish
44mm lectrons with packard bowls
stock ignition with adjustable timing plate
billet stator cover with bearing support
v force reeds with billet intakes
fresh rebuilt 10mm twister billet crank with 120mm rods
polised DM cases

here is a few pics i got of motor on his chassis

ttt

Fo Sale

bump

ill take shearer ss

I dont want to part it out yet thanks

up

...

who done the cases...and cylinder porting..