im looking for a stock head,valve cover xr 400 clutch cover, hell motor parts for a 400ex 99-03. what you got?

fully ported/flowed head by CG performance, HC stage 2 cam, kibble springs and hardened rockers by LRD. $300 shipped

hinson basket (stock inner and pressure plate), newer CBR fibers and stock steels, barnett springs. $100 shipped

I accept paypal and can usually ship within 3 business days of payment.

pm sent.

Het Steve. AKA Yamahaslayer,
why dont you send me the 400ex parts and we can call it even and I will still be taking a loss Jim

Jim

I would if I could, but not mine to just give to ya. I tried to pay you a couple of years ago and you blew me off.

Steve

No I have all communications between us and you never made any arrangements like that. If you would like I can post all of them from the start.

post away we need to know what we are dilling with here. hell if some of you are like me i work to dame hard to have some one @%!& out of my money. and it's not bashing it's saving us from getting !@#$ out of are money.

May 2008, I had some 400ex plastics for sale on eBay. They werent mine, but I was selling for a friend. He was to give me half. I offered to give it to ya, but you just never answered nor replied. Check your PM's

I guess it really didn't matter to ya.

I dont see it in my pm's but if I remember it was very little You can still make payments to me or send me some parts.
you seem to deal allot of parts on here. You said if I left it alone you would pay me so I did but that never happened.

as before, this is something that should be handled outside this guys wanted ad. If you want, you can PM me if you like.

eric

the issue between Jim and I stems back to 2005 (+/-). A vendor of mine sent me sideways and unfortunately Jim's order was involved.

Ive never denied that he is owed something or that his order was perfect/complete when delivered.

Ive never ran away, nor refused any of his communications.

man i really need the clutch set up. but with this going on i cant see buying it. and if you go to ebay i have a 100% + feed back. same for my pay-pal. ericcrip85sx is my ebay. i dont bid or hit pay now if i dont have the money. and i pay same day. thats how it should be done.

Well almost complete I never got the spindles I ordered with that setup. And your right I will not take up any more of his thread. Good luck with your sale. Jim

if you would like to buy it on ebay Ill post it up there for $125 to cover the fees and such.

I got what you need for an 400ex shoot me an pm home of the fastest 400ex on asphalt...and got money to bet on it......

its for sale too

is it all motor ? is it in the 7's ? what size is the motor ? i have a stock bottom end with the top done and it will run in the high lol high high 7's and it a stock frame set up other then the swimg arm it's 8 over. but all bs aside what you got ( pm coming. )

i sent you a pm but no reply. what's up ??????

if you are a good guy like you say then ship it c.o.d to me that way you or me will not get the shaft. so what do you think ?

Get on atv dra look up TRE.I hate to say it but Freddie is good on the 400ex too not too high on prices either.

whats it run in 300 ft

i have no idea only been ran on asphalt

do you have part's for the 400 ?

Looks sweet. How does it run in the 1/8 mile?

Hey harris did u usto run a predator on asphalt a couple years ago. U ever been to nahunta drag strip in eastern nc? ??

sent you a PM

im going to say this. i dont know what happen with you and others that have PM'ED me. but to clear thing's up with the good guy bad guy thing. you have not gave me the shaft on any thing so i should have stayd out of what is going on with you and other's. like i told you in the pm i sent you if you tell me some thing it better be that way. i go by in life that a man is only as good as his word and if his word aint s#!t then he or she aint S#!t. so with that said im sorry for saying spill the bean's on if you are a good guy that is with you and other's not me. thaks for your time yamahaslayer.

Dude he never made good with me so why would he make good with you no matter what bs he is feeding you .I have heard it all.good luck if you buy from him but you have been warned. Jim

The 400 runs 7.2 on motor.Yes i still got my craptor killer i just rebuild the motor with a new setup look out lil two smokes.

Wow that is wicked fast for a EX Congrats would Luke to see it run sometime

me to on the see it run 7.2 that is a lil out there. my 400 with the work it has ( + )nos will not run but 7.91 and every thing is set by a dyno to get the max out of it. im not saying you'r 400 want run it but it's a lil out there for it to be all motor. who does your work ? or do you do it? what track's do you run at ? ill go to the same track and run with you.

if you run 7.2 i have a sweet race for you. and it for $$$$$$$.

Ya'll have been keeping it clean and I appreciate that. But if there is a Issue with a situation that went wrong and ya'll have tried to Resolve it, and haven't been able to do so Please Take it to the Resolution Center. This way hopefully it will be just between the 2 of you and not in a Thread like it is. I understand you were just giving a heads up. Thanks everyone.

So that is you with the predator. I was at nahunta the weekend u were down there wit some friends wit banshees. And you can believe the time freddie did alot of work on a buddys Raptor, stock stroke 102 bore ran a 6.6 if I rember right it may have been a lil faster. But freddie will get it done on asphalt.

where is nahunta at ?

Bout an hour n a half north of the sc line

7.2s all day buddy jim aps does all my work.He can get you a head and cam combo but you got to $$$$$ to go fast ive got atleast 1200 bucks in porting alone plus custom cams that we have tried...Plus a 20 shot is breakfast for the motor i have.sept up your nos and it will fly in till it comes apart that i know lol..

jim aps ? do you know jamie from bolton ?