motor is a ZX14 with turbo and nitrous

if you go to a 13 inch wheel there are bigger tires to run, we have a 26 12 13 on a 4 cylinder cougar

http://www.americanracertires.com/store.php?cid=10&page=2

what size tire do you guys think for me to run on my 10 mill?

20-8-10 or 20-10-10 Depending on the Track, set up, Jocky Weight, Tire Pressure. Burn out no Burn out ect.....

i just moved to royse city and a 1/8 mile track(red line) is only 10 miles from me. i called and they said they allow guads as long as they are clean. i usually run 300 feet but there arent any tracks here in texas. so i mines as well give the asphalt a try. thanks i'll grab me a set of tires next week.

i'll have to play with the sprockets ,jetting. and clutching until i figure it out

Some guys say go around the water box do a dry hop and go from there. Others say go through the water box do a good hot burn out and go from there.
The American Racer Tire isn't really desinged for a Burn out all though some do it anyway.
It all depends on what works for you as all Tracks are not created equally. + they change with the Temps and humidity as well as other factors.
Gearing,Chassie Goemitry,Tire Air Pressure,Jetting, Jocky Position play a roll but one of the most important factors is Clutch tunning.