TDR 10mil Cranks for $395

Countdown to West Coast ATV Shootout November 8th, 9th, 10th, 11th 2012 in Puerto Penasco, Mexico

You are not logged in. [Log In] Planet Sand » Forums » Technical » ATV 2 Stroke » TDR 10mil Cranks for $395

Direct Links to Platinum Sponsors

Arizona

California

Florida

Louisiana

Mississippi

Oklahoma

Oregon

H.O.D Racing

Mattoon Machine

Utah

LC Performance

Packard Racing

Wisconsin

Millenium Technologies

Site Sponsors

Arizona

Clown Racing

Kenz Cycle Tech

California

Schack 'High Quality Kill Switches'

Louisiana

Dyneaux Services LLC 985-759-2991

Michigan

Chariot Performance

Missouri

Hard Times Custom Quads

Page 1 of 2

Topic Options

Rate This Topic

#1100767 - 10/24/11 04:33 PM TDR 10mil Cranks for $395
rjatv New Comer Registered: 03/12/11 Posts: 84 Loc: florida	I know Tony is a Sponsor on this site, and I have dealt with him many times myself with always a great outcome, but I am curious if anybody has purchased one of these cranks and how they feel about it. Please let me know your thoughts. http://www.bansheedepot.com/products.asp?cat=27 _________________________ 421 Cheetah Cub Flotek designed on alky Titan Racing Custom Alky Domes 2006 Banshee Flotek ported 4mil
Top

#1105098 - 01/22/12 05:42 PM Re: TDR 10mil Cranks for $395 [Re: rjatv]
genoapb 100HP MEMBER Registered: 06/04/02 Posts: 1308 Loc: MI	nobody has tried these yet?
Top

#1105099 - 01/22/12 06:42 PM Re: TDR 10mil Cranks for $395 [Re: genoapb]
Part's Building more HP Registered: 08/14/06 Posts: 30886 Loc: Planetsand/ The Sand Box	_________________________ The democracy will cease to exist when you take away from those who are willing to work and give to those who would not. - Thomas Jefferson How Much does it weigh, Race Ready Racing isn't a Addiction 4 me...its Therapy...
Top

#1105249 - 01/25/12 08:52 AM Re: TDR 10mil Cranks for $395 [Re: Part's]
chardog250 Enthusiast Registered: 04/25/06 Posts: 597 Loc: CENTRAL TEXAS	Mite give him a try... I need a 7 mill crank and 73 mm pistons....... _________________________ SLOW A$$ 1/8 MILER!!
Top

#1105334 - 01/26/12 01:52 PM Re: TDR 10mil Cranks for $395 [Re: chardog250]
camatv Cool Sum Bitch Registered: 10/20/03 Posts: 7640 Loc: how come nothing fits??	i THINK turbo bobby has one in his wompus?? but i am not sure. the fordged 10 mill crank from TDR is a nice crank also. not much more money really. i was thinking the other day about maybe just getting the 10 mill webbs and assembling one with hotrods rods and bearings i know are decent/.?
Top

#1105873 - 02/07/12 05:52 PM Re: TDR 10mil Cranks for $395 [Re: rjatv]
turbo bobby Cool Sum Bitch Registered: 02/04/03 Posts: 2218 Loc: NITROUS JUNKY	cam is right, i am running this same crankshaft. i did have a weld break on it right behind the stator on the rod pin. I attribute this to incorrect jetting. when i built this big engine i used stock carbs with 350 mains. i rode it 3 weekends before getting the jetting correct (420 mains). When i had the crank repaired i asked the shop to let me know how much press was required to get it back right. the shop informed me that it was a good tight press, the one where you get it close then it jumps to the other side on the indicator....meaning it has a good amount of press fit! If i was building a 100hp engine I would not be afraid it. check out my youtube channel turbobobby1 for plenty of 10mil wampus serval gopro videos. BTW, this wampus serval 10mil is slowly transforming into a dragbike.....ever so slowly lol.
Top

#1105897 - 02/08/12 06:25 AM Re: TDR 10mil Cranks for $395 [Re: turbo bobby]
TitanRacing Mississippi madman Registered: 07/22/05 Posts: 5145 Loc: Mississippi	I have not built any engines with them I always go with a CW billet usually but I have rebuilt a few off them and they seem to go together really nice, when I do rebuild them I always go back with a set of hotrods and good Japanese bearings, those rods scare me specially the orange ones lol but the last few that I have seen have a different rod on them _________________________ Site Sponsor "The joy is in creating, not maintaining." - Vince Lombardi
Top

#1105914 - 02/08/12 02:26 PM Re: TDR 10mil Cranks for $395 [Re: TitanRacing]
Part's Building more HP Registered: 08/14/06 Posts: 30886 Loc: Planetsand/ The Sand Box	Now wait a minuite did you just say good and Japanese in the same sentence? Sorry couldn't help it.....lol _________________________ The democracy will cease to exist when you take away from those who are willing to work and give to those who would not. - Thomas Jefferson How Much does it weigh, Race Ready Racing isn't a Addiction 4 me...its Therapy...
Top

#1105934 - 02/09/12 06:09 AM Re: TDR 10mil Cranks for $395 [Re: Part's]
TitanRacing Mississippi madman Registered: 07/22/05 Posts: 5145 Loc: Mississippi	lol koyo, ntn, skf, any of those are well made, just not Taiwan, or Chinese main bearings, lmbo max _________________________ Site Sponsor "The joy is in creating, not maintaining." - Vince Lombardi
Top

#1107403 - 03/08/12 05:26 PM Re: TDR 10mil Cranks for $395 [Re: TitanRacing]
camatv Cool Sum Bitch Registered: 10/20/03 Posts: 7640 Loc: how come nothing fits??	i was shown a set of "silver high performance rods" from one of these suppliers i asked what the differnence was in them and they said some american's prefer silver rods so we PAINT them. HOLY HECK wonder if i can get just the webbs for these cranks...
Top