okay this thing is driving me crazy!!! here is the problem anytime im on the gas the front end darts to either the left or right randomly and i cannot control past 3rd gear. things i have changed

had metaltech a-arms switch to gt a-arms(got a little better)
set toe to 1/8 inch
camber @ 0
caster is at 17 degrees
changed front rims 3 times

still doing the same thing i just dont get it maybe someone on here has some good input what to try next? oh yeah it does the same thing with shocks or struts makes no difference.....

We run 1/4 In. Toe in.
Ours is on a stock Banshee Chassie we have 5 set up the same way over 100 mph no problems.

are you sure the caster is set the right direction?

this is what garret told me when he made them for me!!!!

anthing else im missing?

put some pictures up if you can, it will be alot easier to see what is going on that way

coming right up!!

these are some pics what to u thing?

just so i dont get a beat down i also have marvin shaws and stock shocks i tried. i got home depot 1inch square tubing to make econo struts to see if it made a difference!!!lol

Are you running those tires on the pavement?

sand most of the time im just trying to get the front right on the street. sand is far from the house....

Get rid of those tires b4 you end up on your head with the bike riding you!

i did notice one thing that carries from cars to bikes on asphalt you're kingpin angle is not steep enough basically that is the angle from the top arm to the bottom throught the spindle it will cause the fron end to act real funny on pavement optimum kingpin angle is 15deg hope that helps

your setup looks to be correct, if it darts when you let off the throttle than your frontend is misaligned but as you said, it happens while on the gas, it is swingarm or axle bearings you need to be checking

I had the same problem w/ the moped tires. Let some air out and fixed the problem.