We have tons left over send me a PM if you wanna buy some!
And I can send them out today!!!
They make a great stocking stuffer

bump!

this is a stupid question but i'm gonna ask anyway. can these be used on lectrons & what is the benefit over the standard pj?
just curious, haven't been to your site or anything. oh, how much $?

yes you can put them in a lectron and the benefit would be they will flow 2X the fuel. but if your not having a problem with that then theres no reason to change them.

The one I got from you a good while back has the fuel inlet facing the wrong way, towards the carb body, and there is not enough clearance to run a line to it, have they been changed now ???

your trying to install it the wrong way. go here to see the right way of doing it. http://www.davemooreracing.com/super_jet_inst.html

if this does not work please post a pic of where you are trying to install it. remember the super jet was designed to have the incoming air move over the face of the outlets putting the jets inlet facing out to the side of the carb.

The next to last step is critical for proper atomization/vaporization ... the fact these will flow more fuel (imo) takes a back seat to atomization characteristics ... !?

I ran one of these in a big Lectron. it worked great, made more power and used less fuel so I know the atomization was superior to the powerjet I had before. I could only run it a 1/4 turn open on gas so the adjustment was really fine if i had to change it.

If you run alky or have any interest in running Nitromethane, these are a MUST!!!! There is no other powerjet setup that will work nearly as well with NM as these do.

are these on sale?

right now they are on sale for $45 each and if you buy more then 5 there $40 each.